#1 Powder Coating | Paint | Remover | for Paint: Powder Coating Removal from Aluminum.

Aluminum Wheel Paint | Remover | Low Temperature | Paint Removal: MILES 6840, MILES 8648, MILES 8659, MILES 8660

 

Aluminum Wheel Paint Remover | Paint Stripping Poducts and Services.  Alloy Wheel Powder Coating Stripper for Aluminum Wheel Repair: Aluminum Rim Repair.  Recycle Costly Paint Rework from Aluminum and Wheels. Paint Stripper to Strip Powder and Remove Clear Coating  from  Aluminum Wheels & Steel Parts, Hooks, Racks & Fixtures.

Contact Us For a FREE - Paint Strip Products Recommendation or Paint Stripping Services, Quote:  

 

 MILES 8660 Aluminum Alloy Wheel Striiping Solution, Room Temperature or use at Low Temperature

 

 

Aluminum Wheels can be safely, chemical stripped at low temperatures with MILES Chemical Solutions #8660. The Aluminum Wheel can be reconditioned by removing the old coating with MILES Chemical Solutions #8660 in approximately one hour and then re-coating the aluminum rims with durable powder coating.

Process Requirements:

*  A stainless steel or polypropylene tank to immerse the aluminum wheel/s.

*  An immersion heater.

*  A tank mixer for agitation, Note: Never use air agitation, chemical oxidation will occur which decreases chemical bath life.

*  Polypropylene floating evaporation inhibitor balls

*  MILES Chemical Solutions #8660 Aluminum Stripping Solution Concentrate.

*  Water 

  ____________________________

Steps:

1) Utilize a Polypropylene or Stainless,

heated immersion strip tank.

2) Add 50% MILES Chemical Solutions #8660 and 50% water.

3) Agitate solution with mixer or circulation pump. Note: Never agitate with direct-air! Oxidation, decreases chemical bath life.

4) Heat solution up to to 150F., you can operate heated as low as 130F. with less evaporation and slightly longer strip time. 

5) Soak wheels for 1.5 hours, while maintaining 150 Degrees F. Note: Utilize a tank lid and polypropylene floating evaporation inhibitor balls to reduce solution loss and replenishment requirements and to extend  chemical bath life.

6) Rinse the Aluminum Wheels with water and a pressure washer.           

to remove paint: powder and excess coating from recessed areas on the aluminum wheel surface.

____________________________

Benefits:

After stripping, the aluminum alloy wheels have a pre-paint, original bright surface appearance and are ready to return to the powder coating process.  

The de-laminated coating sludge can be easily removed from the strip tank with a 75- mesh in-line, stainless basket strainer, skimmer or screen parts basket filter.

Note:

• MILES Chemical Solutions #8660 coating removal process is normally implemented in Paint Finishing and Powder Coating facilities, additionally at many Industrial-Coating Removal Service & Stripping Service Contractors worldwide.

• This is an easy to implement process in an Industrial Environment, such as in Paint, Finishing and Powder Coating Facilities and at Coating   Removal Service Providers. This aluminum wheel stripping process was not developed for individual consumer use.

• MILES#8659 a thickened brush-on product used 100%- neat at ambient room temperatures to remove 1-4 mils of cured coating in 1-3 hours or overnight for parts and paint hooks with build-up of 4-8 mils coating., European and Japanese wheels require overnight application to strip a single set of aluminum wheels.                                                                                          ____________________________

MILES #8648 Aluminum Strip: Powder Coat Stripper

DESCRIPTION:

MILES#8648 AMBIENT POWDER STRIP-THIN is a paint strip solution formulated to under-cut: de-laminate and remove Powder Coating from Aluminum and Steel paint rework.  #8648 can be used to strip Aluminum Wheels and e-coat racks: e-coat paint rework when HEATED.

APPLICATION:

MILES#8648 AMBIENT POWDER STRIP-THIN Utilize a stainless steel or polypropylene immersion tank with a lid, ventilation and a mixer. Immerse powder  coated parts & hooks in MILES-#8648 at 50% concentration with water at 135F.-185F. to strip powder coated aluminum wheels and powder coat rework parts: remove powder coating in 15 to 20 minutes per 3 mils  cured powder coating. Utilize-polypropylene-evaporation inhibitor-floats to reduce evaporation and replenishment requirements, save on chemical, dollars and extend solution bath life. A pressure (1800-5000psi), water rinse is normally recommended when utilizing under-cutting: de-laminating technologies. The Benefits of under-cutting: de-laminating paint removal process solutions are many, including: easier to remove coating sludge in-sheets, resulting in longer bath life, lower operating cost, utilizing up to 50% water in the process, safer less hazardous for the operator and the environment.

 or Utilize MILES #8648, 100%- neat at ambient room temperatures to remove 1-4 mils of cured coating in 1-3 hours or overnight for parts and paint hooks with build-up of 4-8 mils coating. 

For (e-coat removal, utilize #8648 heated only) at 50% concentration with water at temperatures of 135F.-185F. Strip time is 10 minutes to 15 minutes.

Place_Secure_Order_Here

We accept:

____________________________________________________________

 

T   E   C   H   N   I   C   A   L        D   A   T   A 

DESCRIPTION:

MILES #8659 Thickened, Brush-on, Room Temperature Stripper.

MILES#8659 a thickened brush-on product used at  room - temperature to remove clear coat and TGIC Powder in 1-3 hours, European and Japanese wheels require overnight application to strip aluminum wheels.  The loose coating can be removed with a spark-less scraper, disposable cloth or steel wool pads, and then rinse with soap and water, dry and reprocessed through the paint or powder coating.  

 

Place_Secure_Order_Here

We accept:

_________________________________________________________

DESCRIPTION:

MILES #8660 Room Temperature or Low Temperature Clear Coat, Paint & Powder Coat Stripping Solution.

Room Temperature, Non-Methylene Chloride Stripper #8660Liquid Immersion Stripping Solution.

MILES #8660 is used as received; Removes Clear Coat from Aluminum Alloy Wheels, Acrylics, Epoxy, Urethanes, Enamels and Paint and Powder Coatings.  Immerse parts to be stripped in 100% MILES #8660 at room temperature and let sit for 30 minutes to 2-4 hours to remove powder coatings or overnight to remove OEM-Automotive Base/Clear coatings. Strip with adequate ventilation when heating solution. Product is acid accelerated with low pH to penetrate hard to remove coatings. Will not burn skin upon contact, rinse with soap and water upon accidental skin contact. Product ships with a Corrosive shipping label.

MILES 8660 is a concentrated solution that may be diluted with up to 50% water when heated. To remove coatings faster, heat MILES 8660 between 130F-160F. for best results.

The loose coating can be removed with a plastic scraper, disposable cloth, mild abrasive media blasting, steel wool pads or rinsed with a pressure washer with water.

We offer no free samples however, we do sell small 1-Gallon & 5-Gallon containers for your evaluation.

 

Place_Secure_Order_Here

We accept:

__________________________________________________________

DESCRIPTION:

MILES #6840 Economical Concentrated Paint & Powder Coat Stripper

MILES #6840 is an economical concentrated stripping solution used to strip coatings from aluminum and steel, utilized at 50% with water in a stainless steel or polypropylene immersion tank at 140F. to 160F., strip time for 3-mils of cured powder coating is usually 15-20 minutes in a heated immersion tank.

If you would prefer operating at room temperature, (for powder coat removal only), OEM Wheel Coatings require heat to remove, i.e. BMW factory coatings) at room temperature, the best performance can be obtained by utilizing the MILES #6840 neat/without dilution. Let parts set in the solution for 1-3 hours the parts or hooks are then rinsed, dried and reprocessed through the paint or powder coating system.

We offer no free samples however, we do sell small 1-Gallon & 5-Gallon containers for your evaluation.

 

Place_Secure_Order_Here

We accept:

___________________________________________________________

Aluminum Wheel Stripper, Powder Coat Stripper for Stripping Aluminum Alloy Wheels, Strip Powder Coating from Aluminum. Additional Paint Stripping Solutions are available to Remove  E-coat , Aluminum Stripping Solutions, Eco-Friendly Paint Strippers. 

 

                                        

Restore, Recycle & Reclaim Costly Paint Rework with MILES Chemical Paint Strip Solutions, Powder Coating Strippers, Remove E-coat, Paint Stripper for Stripping Aluminum

 

Additional offerings: Aluminum Paint Strippers, Paint Removers, Powder 

Paint Removal Products, Paint Stripping Service/Coating Removal Service.

Contact us for your specific paint stripper/paint remover product/powder coating stripper requirements or A Free  Paint Removal & Paint Stripping Service/Coatings Removal  Quote and  for 

Paint Stripping Recommendation:  

 

Restore, Recycle & Reclaim Costly Paint Rework with MILES Chemical Paint Strip Solutions, Powder Coating Strippers, Remove E-coat, Paint Stripper for Stripping Aluminum Galvanized Steel non-ferrous & polypropylene and nylon plastics, Paint Stripping Products and more... 

 

Find Custom Coaters: Powder Coaters: Paint Finishers: Metal Finishers: Finishing Equipment: Finishing Suppliers: Finishing Events and Powder Coating Online Resources Here: